Repositionable protective film
Easy to apply by hand on any flat or curved surfaces because the film is repositionable and pre-cut.
Suitable for the protection of a wide range of items: door handles, electrical switches, buttons (in lifts, on distributors of beverages and foods, hotel safes, etc.), computer screens, keyboards, control panels, remote controls, bank card terminals and numerous other surfaces.
Easy to remove without leaving any glue on the surface.
Easy to clean.
Polyethylene film with a 100% adhesive side.
Available in 2 sizes:
- Length: 50m, width: 150mm, thickness: 60µm, 1 roll = 7.5 m² of protection
- Length: 45m, width: 220mm, thickness: 60µm, 1 roll = 9.9 m² of protection
Easy to peel off without leaving any marks on surfaces
Transparent mat film to leave the appearance of the surface without forgetting the film
Recyclable: No cons-indication to discard the product in the trash for recyclable materials in accordance with local regulations
Cleanable with standard non-abrasives cleaning product, including disinfectant liquids
Made in France
Film must be applied on clean, smooth and dry surfaces (no dust). Avoid cold or humid surfaces.
To maintain a beautiful aesthetic appearance of the surface, we recommend that you change the film a maximum of 3 months after application.
Designs not to leave marks when removed from the surface under normal conditions of application and use.
As the diversity of surfaces is important, advice to test film beforehand on the surface to be protected.
Do not apply on a surface where the coating (paint, varnish, etc.) does not have sufficient.
To ensure proper application and use, film should be indoor applied at room temperature, without direct exposure to UV
The use of the film does not replace regular cleaning of protected surfaces
To facilitate the application of the film, you can slightly moisten the surface and apply with a rigid card (example bankcard) to eliminate bubbles.